Installation & Assembly

Step 0. (If your track is 7.5FT or under, please skip this step)

Connect the tracks with the track connector like the above diagram. Align the

holes on the track connector with two small holes at the end of the track.

Tighten the screws and nuts.

Step 1.

Use a stud finder to locate the drywall studs and mark them up. Hold the

track up and align with the marked studs to make sure the holes on the track

match the studs on the wall. You can also mount a header-board into the studs

first. You might want to paint the board same color as your door or wall before

the installation.