Spec Sheet

Heats
up to 65ft
2
Heats
up to 100ft
2
Heats
up to 130ft
2
Heats
up to 160ft
2
15ft
13ft
10ft
10ft
2000W & 4000W 3000W & 6000W
Model 2000W 3000W 4000W 6000W
Part no. BH0420002 BH0420003 BH0420004 BH0420005
No. of Elements Single element Single element Double element Double element
Bracket Length 6.5” 6.5” 9.5” 9.5”
Power (Watts) 2000W 3000W 4000W 6000W
Heating Area* up to 65ft
2
up to 100ft
2
up to 130ft
2
up to 160ft
2
Power connection required (Volts/Amps) 220 V / 9 A 220 V / 13.6 A 220 V / 18.1A 220 V / 27.2A
Dimension (W”xD”xH”) 44” x 8.5” x 3.5” 56” x 8.5” x 3.5” 44” x 8.5” x 3.5” 56” x 8.5” x 3.5”
Minimum Mounting height requirement to ground Ceiling Mounting - 96” (8’) / Wall Mounting - 96” (8’)
Weight (lb) 19.8lb 22lb 19.8lb 22lb
Finish Black High Temperature Coating
Product must only be installed and serviced by a licensed and authorised technician.
Product manual must be read before installing or servicing this product.
*Heating areas are based on protected environment with mounting height of 96” (8’). For unprotected and extremely cold and
windy environments heating areas can be less. Please contact Bromic Heating for further advice.
2000W 3000W 4000W 6000W
BROMICHEATING.COM
DIMENSIONS: (in inches)
ELECTRIC
HEATING AREAS*:
SPECIFICATIONS:
HEAD OFFICE: 1 Suttor Street, Silverwater, Sydney NSW 2128 Australia NORTH AMERICA POSTAL: 13223 Black Mountain Rd Suite 1305 San Diego, CA. 92129
T: 1 800 301 1293 (within America) F: [phone] E: [e-mail] W: www.bromicheating.com
10”
12”
12”
45°
5”
45°
96” (8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
12”
13”
18” 12”
30°
96” (8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
96” (8’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
96” (8’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
30
°
4”
6”
10”
12”
12”
45°
5”
45°
96” (8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
12”
13”
18” 12”
30°
96” (8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
96” (8’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
96” (8’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
30
°
4”
6”
INSTALLATION CLEARANCES
FOR 2000W & 3000W MODELS
(All measurements in inches)
INSTALLATION CLEARANCES FOR
4000W & 6000W MODELS
(All measurements in inches)
44”
56”
3.5”
8.5”
2000W & 4000W
3000W & 6000W
International patent pending and design registered by BROMIC HEATING Pty Ltd, a member of the Bromic Group of companies.
*Alternatively, short mounting brackets can be used for wall mounting of the 4000w & 6000w models to position the heater closer to
the wall. Short mounting brackets must be purchased separately.
4005951
CONFORMS TO UL STD. NO. 2021
CERTIFIED TO CSA STD. C22.2 NO.46