User Manual

LPV-WL11G User’s Manual (Introduction)
12
WindowsXP/2000 Adhoc Mode Setting
This chapter shows how to set up Adhoc Mode with the WindowsXP/2000.
1 Start LPV2 MANAGER
• Set the channel the same as Wireless LAN card setting to "Channel Box".
• If you are using a WEP Key, put check mark on the "USE WEP Key" box and enter a
WEP Key.
2
3
Setup is completed.
Click "Wireless Setting" and set “Ad-
hoc“ mode.
Enter Wireless Setting
Click [OK]
Please re-enter WEP Key at the "Re-
enter
WEP Key" message Box.
Click［OK］
Click［OK］
Click［OK］