User Manual

CardBus Wireless LAN Card User’s Manual
Note!
These instructions apply to most notebook computers. For detailed
information on inserting PC cards into your notebook, consult the
notebook manual.
Follow the procedure below to install the Wireless LAN card.
1. With 68-pin connector of the card facing the CardBus slots on notebook,
slide the card all the way into an empty slot.
2. Connect to a network.
LED Indicators
LINK
POWER
The following table describes the meaning of LED indicators:
LED MEANING
POWER
Indicates that the Adapter is powered on (solid green).
ACT
Indicates Active status. The LED is off while the wireless
connection is linked. If the LED is blinking green, the
adapter is searching for possible wireless connection or
transmitting the data via wireless.
9