User's Manual

11Mbps Wireless Access Point User's Manual
7
2.Hardware Installation
Physical Details
Rear Panel
Front Panel
Power Input LAN connection for uplink to wired LAN INIT Button
Power Input Only use the power adapter supplied with the Access Point
LAN Connection Use standard Ethernet cable (RJ-45 connector) to connect your
PC, hub/switch or broadband router/modem to this port.
INIT Button “INIT” mean “Initiation”. While pressing the button, the AP will
reboot and reset current settings to factory default settings. The left
indicator “DIAG” on AP will be off and then begin blinking. Then this
initiation action will be completed when the indicator “ DIAG” is
always green instead of blinking.
Diversity Dipole Antenna