User's Manual

User Manual of Wireless Access Point with 4-Port 10/100M LAN Switch
5
1. Introduction
Congratulations on your purchase of this 11Mbps Wireless Access Point with 4-port
10/100M LAN Swith (AP). This product is designed specifically for SOHO 11Mbps wireless
LAN environment. It is easy to configure and operate even by non-technical users.
Instructions for installing and configuring this product are included in this manual. Before you
install and use this product, please read the manual carefully so you may take full advantage
of its functions.
The Wireless Access Point Features
LAN Features
#
DHCP Client – Enable the AP to act as a DHCP client to receive IP address from DHCP
Server in the wired Ethernet LAN.
#
Built-in Four 100BaseTX LAN Switch Ports – All four ports support Auto MDIX for
uplink or connect with any local Ethernet-ready devices. It’s designed as a bridge
between wired and wireless LAN systems.
Wireless Features
#
Standard Compliant – The AP complies with IEEE802.11b standard, and it is
interoperable with IEEE802.11b-Compliant Equipment
#
High Speed Wireless Connection – Using Diversity Dipole Antenna to secure reliable
11Mbps wireless data rate connection.
#
Data Rate Auto Fall-Back - Provides 11, 5.5, 2 and 1Mbps wireless data rate shifting
dynamically to guarantee availability and reliability of wireless connections
#
Roaming – Provides seamless roaming within IEEE802.11b wireless LAN
infrastructure.
#
Long Distance Reach – Support 80M indoor and 300M outdoors long operating
distance under normal environment condition.
Configuration & Management
#
Easy to Setup – With windows-based Wireless Navigator Utility, user can easily setup
the IP address of this AP, and upgrade the firmware.
#
Easy to manage – User can use any WEB browser from anywhere on the wired or
wireless LAN to configure the AP easily.