User's Manual

User Manual of Wireless Access Point with 4-Port 10/100M LAN Switch

Install the Wireless Navigator

The Wireless Navigator Utility is provided to allow user(s) easily to configure the AP through

any Windows-based PC over wired or wireless LAN port. This section describes procedures

for installing the Wireless Navigator Utility to PC.

Step 1: Insert the installation CD-ROM into the CD-ROM drive. Run SETUP.EXE program

on the CD-ROM. The following window will be shown automatically.

Step 2: After InstallShield Wizard preparation finished, the following window will be shown.

Click the Next button to continue.