User Manual
CF Wireless Network Card User’s Manual
11
Configuring the CF Wireless LAN Card
1. After installing the CF Wireless LAN Card Driver, the following Configuration Utility
screen will appear automatically. Under the Mode drop-box, you may choose either
Infrastructure or Ad-Hoc. The Infrastructure mode allows a wireless adapter to
communicate with a wired network employing an Access Point, while the Ad-Hoc mode
allows wireless-to-wireless, peer-to-peer communication. If you choose Infrastructure,
the SSID should have the same name as the Access Point. If you choose Ad-Hoc, all
clients should share the same SSID name. You may also select which Transfer Rate you
wish to use: 1, 2, 5.5, 11Mbps or Auto Rate. Under Power Saving Mode, you can make
it disabled for uninterrupted data communication, or make it enabled to allow your
Wireless USB Network Adapter to enter “sleep” mode. Click Apply to save the settings.