User Manual

PCI Wireless Network Card User’s Manual
17
1. Turn off the computer‚ unplug the power cord and remove the computer’s
cover.
2. Pick a free PCI expansion slot and remover the protective bracket.
3. Insert the card into the slot until it is fully seated.
4. Secure the adapter bracket with the screw.
5. Replace the computer’s cover.
6. Reconnect the power cord and turn on the computer.
LED Indicators
Sideview of PCI card from bracket.
The following table describes the meaning of LED indicators:
LED MEANING
POWER
Indicates that the Adapter is powered on when the LED
lights up.
LINK
Indicates link status. The LED lights up while the wireless
connection is linked. If the light is blinking, it means there is
data sending or receiving via wireless.
LINK
POWER
SMA Connector