Owner`s manual

Page 10 B101278-6-0610

1. Mount grill onto cart, post or base per the mounting in-

structions.

2. Place radiation shield (13) (ange side up) onto four

raised bosses located on the interior bottom of the grill.

See Figure 1.

3. R3B model only: Slide ignitor spacer (11) onto collec-

tor box assembly (10) and secure with nuts.

See Figure 2.

Attention: Do not cut or damage ignitor wires.

gr i l l as s e m b l y

Figure 1

4. R3B model only: Insert collector box assembly into

hole adjacent to burner. The opening of the collector

box should be facing the burner. The infrared ignitor

wire slides through the empty hole next to the burner.

See Figure 3.

Figure 2

Figure 3

R3B