Owner's manual

WARRANTY DISCLAIMER
No warranties of any nature (expressed, implied, tness of usage or merchantability) are given on these products. Seller undertakes no responsibility for any product sold.
Additional disclaimers are within and are binding upon this contract. Due to the intended usage of products offered, all products are sold on an “as-is” basis, and no
warranties of any kind, whether written or oral are made by BRODIX, Inc., its agents or employees. All implied warranties, including the implied warranties of merchantibility and tness are
expressly excluded, and the buyer bears the entire risk as to quality performance and use of these products. BRODIX, Inc. will assume no responsibility of personal injury, labor or other injury
arising out of the usage of high performance racing parts or products. Any defective part will be handled between the original manufacturer and the buyer. BRODIX, Inc. reserves the right to
change specications, prices and discontinue parts without notice. Installation of BRODIX heads may adversely affect the vehicle manufacturer’s warranties, and may violate State and Federal
laws when vehicles so equipped are operated other than strictly off-highway. BRODIX reserves the right to discontinue any product at its sole discretion and without any liability with respect to
similar products already in the eld. Some parts are not legal for sale or use on pollution controlled motor vehicles.
BLOCK PART NUMBERS
8B 2000 A
• 4.230 BORE, STD CAM LOCATION, 9.800 DECK HEIGHT.
• 4.480 BORE, STD CAM LOCATION, 9.800 OR 10.200 DECK HEIGHT.
• 4.590 BORE, STD CAM LOCATION, 9.800 OR 10.200 DECK HEIGHT.
8B 2000 C
• 4.480 BORE, RAISED CAM LOCATION, 9.800, 10.200, OR 10.700 DECK HEIGHT.
• 4.590 BORE, RAISED CAM LOCATION, 9.800, 10.200, OR 10.700 DECK HEIGHT.
8B 2100 C
• 4.480 BORE, RAISED CAM LOCATION, 11.100 OR 11.200 DECK HEIGHT.
• 4.590 BORE, RAISED CAM LOCATION, 11.100 OR 11.200 DECK HEIGHT.
8B 2200 C
• 4.480 BORE, RAISED CAM LOCATION, 11.500 OR 11.625 DECK HEIGHT.
• 4.590 BORE, RAISED CAM LOCATION, 11.500 OR 11.625 DECK HEIGHT.
MUST SPECIFY DECK HEIGHT, CAM BEARING STYLE, LIFTER SIZE, BORE
SIZE, LENGTH OF STROKE, AND CAM LOCATION.
MAIN CAPS
MAIN STUDS AND NUTS
8B MC 454 ST-S-C-GO
8B MC 454 ST-S-C-PF
8B MC 454 ST-S-F-GO
8B MC 454 ST-S-F-PF
8B MC 454 ST-S-R-GO
8B MC 454 ST-S-R-PF
8B MS 4.650 1/2
8B MS 4.050 1/2
8B MS 4.250 1/2
SLEEVES
8B SL 44-315: 4.230 i.d., 4.695 o.d., 6.000 o.a.l.
8B SL 44-318: 4.480 i.d., 4.725 o.d., 6.300 o.a.l.
8B SL 44-317: 4.480 i.d., 4.725 o.d., 6.600 o.a.l.
8B SL 44-322: 4.480 i.d., 4.725 o.d., 7.100 o.a.l.
8B SL 44-500; 4.590 i.d., 4.725 o.d., 7.600 o.a.l.
OTHER SIZES AVAILABLE,
CALL FOR DIMENSIONS AND PART NUMBERS
8B CAM BEARINGS STD BB
8B CAM BEARINGS 55 mm
8B CAM BEARINGS 60 mm BABBIT
8B CAM BEARINGS BB 50 mm
SK HS BIG BLOCK
SK HS BIG BLOCK DART
SK HS BIG DUKE
SK HS PB 2005 / 1200
SK HS BIG BLOCK RR
HEAD STUDS
8B PLUG BLOCK L
8B O-RING BLOCK PLUG
8B PLUG 814-6C
8B PLUG 814-7C
8B O-RING / RCAM PLUG BB
8B O-RING / RCAM PLUG 55
PLUGS AND O-RINGS
8B DOW TC FRONT
8B HEAD DOW BB
8B DOW BH 1.25
8B DOW RING BB
8B DOW PULL
DOWELS
CAM BEARINGS
8B RCAM PLUG 55
8B RCAM PLUG BB
(SNAP RINGS AND
SPIRAL LOCKS)
8B RCAM BB RING
8B SPIRAL LOCK BB
8B SPIRAL LOCK 55
8B SPIRAL LOCK RB
CAM PLUGS
OIL RESTRICTORS
8B BB OIL RESTRICTORS
(CUSTOM FOR BRODIX
BLOCK)
Not legal for sale or use on pollution controlled motor vehicles. © Copyright 2014 Brodix, Inc.
WHILE OUR PRODUCTS ARE USED ON MANY SUPER-CHARGED
APPLICATIONS SUCCESSFULLY, PLEASE BE AWARE
THAT THERE IS A GREATER POTENTIAL FOR ENGINE DAMAGE
DUE TO THE POSSIBILITY OF TUNING ERRORS.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ALWAYS CONFIRM PRICE WHEN PLACING YOUR ORDER.
WE WILL MAKE EVERY EFFORT TO KEEP YOU INFORMED OF INCREASES.
CAM LOCATION AND SPECS
• STANDARD CAM LOCATION
• RAISED CAM LOCATION .400
• AVAILABLE WITH ROLLER CAM BEARINGS
• REQUIRES SPECIAL CAM BEARINGS AVAILABLE
FROM BRODIX
• 55 mm ROLLER CAM BEARINGS AVAILABLE
• 60 mm BABBIT BEARINGS AVAILABLE
ACCESSORIES
• AVAILABLE WITH ALL IRON BLOCK ACCESSORIES
DIRECT REPLACEMENT
• STARTER BOSS ON RIGHT SIDE
• OIL FILTER IN STANDARD LOCATION
• SPECIAL HEAD STUDS AVAILABLE FROM BRODIX
• PLUG KITS INCLUDED FOR BLOCKS
• INTERNAL HEAD STUD LUG INCLUDED
MAIN CAPS
• STANDARD BIG BLOCK MAINS
• BILLET STEEL MAIN CAPS STANDARD
• 12 POINT MAIN STUD NUTS
• ALIGN HONE AVAILABLE
• ALL CAPS ARE WET SUMP - MUST BE PLUGGED
TO RUN DRY SUMP
HEIGHTS OF BLOCKS
• 9.800 - 10.200 STANDARD BLOCK
• 9.800, 10.200, OR 10.700 RAISED CAM
• 11.100 - 11.200 RAISED CAM
• 11.500 - 11.625 RAISED CAM
STROKE CLEARANCE
• STANDARD CAM LOCATION - 4.750
• RAISED CAM LOCATION 4.750 WITH SLEEVE
NOTCH, 5.00 WITH SOME BLOCK CLEARING
AND SLEEVE NOTCH
• PAN RAIL DRILLED FOR DUAL PATTERN (STD & WIDE)
• 4.250 i.d. MAX BORE 4.500
• STANDARD o.d. 9.800 DECK 4.725 X 6.300
• STANDARD o.d. 10.200 DECK 4.725 X 6.600
• STANDARD o.d. 11.100 & 11.200 DECK 4.725 X 7.100
• STANDARD o.d. 11.500 & 11.625 DECK 4.725 X 7.600
• STANDARD o.d. 10.700 DECK RAISED CAM
4.725 X 7.100
• REPAIR SLEEVES AVAILABLE
• SMALLER o.d. SLEEVES AVAILABLE
4.695 X 6.300 OR 4.695 X 6.600
SLEEVES
TORQUE SPECS
• CENTER 95 ft-lb
• OUTSIDE 85 ft-lb
• VALLEY LUG BOLTS 50 ft-lb
• TORQUE WITH 30W MOTOR OIL
www.brodix.com • 301 MAPLE AVENUE • P.O. BOX 1347 • MENA, AR 71953
ORDER, TECH, AND INFORMATION: [phone] • FAX: [phone]