Specifications

587 Tilt Wheelchair
23
Seat Height Post Adjustment:
1) Locate the seat height adjustment bolts on both sides of
the front of the seat on the chair frame
2) Using a 3/16” Allen key wrench to the outside of the frame
and a ½” wrench to the inside of the frame, remove the bolts.
Be sure to note the location o the bolts and spacers.
3) Raise or lower the seat by changing the cylinder mounting
position to correspond with the holes at the desired seat
height. (See the seat height combination diagram to
determine the desired seat)
4) Insert the bolts through the desired corresponding holes
and tighten the bolts.
5) Adjust the caster height position and mag wheel position
accordingly if necessary. (See the seat height combination
diagram, page 24)
587 Seat Height Combinations
Seat Height Post Adjustment Range
(With Seat Pan)
Mag Wheel Mag Wheel Caster Option 1 Caster Option 2
(For Strapped Seat Add 1") Diameter
Mnt
Position
Diameter
Fork
Position
Diameter
Fork
Position
14", 15", 16", 17" 20" Mid 6" High None None
15", 16", 17", 18" 20" High 6" Mid 8" High
14", 15", 16", 17" 22" Low 6" High None None
15", 16", 17", 18" 22" Mid 6" Mid 8" High
16", 17", 18", 19" 22" High 6" Low 8" Mid
15", 16", 17", 18" 24" Low 6" Mid 8" High
16", 17", 18", 19" 24" Mid 6" Low 8" Mid
17", 18", 19", 20" 24" High None None 8" Low
Seat height adjustment
bolts (at front of frame)
Seat hei
g
ht increments
Diagram #16
Seat height post adjustment