Specifications

587

Tilt Wheelchair

4.2 Anti-Tippers and Wheel Locks

Locking/Unlocking the Rear Wheels

1. To lock push Wheel Lock Handle towards the front of the wheelchair until wheel is locked

in place.

2. To unlock pull Wheel Lock Handle upwards towards the back of the wheelchair. It rests

perpendicular to the ground.

Adjusting the Wheel Lock

1. Ensure wheel lock is unlocked.

2. Using a 5 mm Allen key wrench, loosen the 2 socket head bolts on top of the mounting

clamp.

3. Once loose, slide Locking Unit to desired position and tighten.

4. Engage lock and measure the distance the wheel lock is embedded into the tire. When

engaged, the wheel lock must be embedded in the tire at least 1/8” to hold the

wheelchair.

5. Repeat steps 1 through 4 if necessary until the 1/8” measurement is obtained.

Wheel Lock Handle

Wheel Lock Shoe

Diagram #5

Rear Wheel Lock

Move Wheel Lock Handle

in this direction to lock

(toward front of chair)

Mounting Clamp