Specifications

587 Tilt Wheelchair
11
If the caregiver performing the functional testing believes that any function is not operating
correctly, the chair should be taken out of service until a satisfactory functional test can be
completed.
The caregiver performing the testing should be aware that the seat tilt operations will be
more difficult when the wheelchair is unoccupied.
When performing repairs or maintenance, do not use any lubricants that contain solvents.
Solvents will damage many of the moving components in the chair. If necessary, a white, food
grade grease lubricant may be used on the sliding components on the wheelchair. Do not use
spray lubricants on any part of the chair.
1.15 Patient Specific Instructions WARNING
The professional caregiver responsible for the patient’s seating shall add such additional
instructions as are necessary for the safety and comfort of the patient using the wheelchair based
on their professional experience and knowledge of the patient’s specific conditions and
requirements. These instructions form a part of the Safety Requirements for using the wheelchair
with that patient and must be made available to all caregivers.
Safety and Handling of Wheelchairs
This manual describes the most common procedures and techniques involved in the safe
handling and maintenance of BRODA chairs. It is important to understand, both conceptually and
physically, the handling of the chair in order to prevent any injury to body, or misuse of the chair.
The information provided here is to be regarded as a general guide and is based on techniques
that have proven to be beneficial and successful by many users.
Stability and Balance
Any activities that require movement in the wheelchair have an effect on the center of gravity of
the chair. Therefore, it is very important not to lean forward out of the chair any further than the
length of the armrests. Also, do not attempt to reach for objects on the floor by moving forward in
your seat, or leaning over between the knees to pick them up.
If you do need to lean forward, ensure that the front casters are pointing forward to maintain the
stability of the chair. You can do this by pushing forward and then reversing it in a straight line. It
is advisable to also engage the wheel locks when leaning forward.
Leaning over the top of the back upholstery will change your center of gravity and may cause the
chair to tip over. It is advisable to position the chair as close as possible to the desired object,
then point the front casters forward. Reach back only as far as your arm will extend without
changing your sitting position.
When attempting a transfer in or out of the wheelchair, reduce the distance of the gap between
the chair and the destination of the transfer. Ensure the casters are turned parallel to the object
you are transferring onto, and that the wheel locks are engaged.
It is recommended that you practice bending, reaching and transferring activities with the help of
a qualified healthcare professional before attempting such activities on your own. This will
familiarize yourself and your caregiver with the particular safety limits of the chair.
It is important that if assistance is required with the use of the chair, that the caregiver remember
to bend their knees, and keep their back straight whenever tipping the chair, or pushing the chair
over curbs or other obstacles.