Technical data

82 Enterprise Wireless LAN Antenna Specification Guide

53-1001881-01

Configuring the AP 7131 Series Transmit Power

5. Select the System Configuration tab to define the access point’s country code and radio

configuration.

6. Select the Country for the access point’s country of operation.

The access point prompts for the correct country code on the first login. A warning message

also displays stating an incorrect country setting may result in illegal radio operation. Selecting

the correct country is central to legally operating the access point. Each country has its own

regulatory restrictions concerning electromagnetic emissions and the maximum RF signal

strength that can be transmitted. To ensure compliance with national and local laws, set the

country accurately.

NOTE

If the access point is a US supported model, the country code is automatically set to US.

7. Refer to the Radio Configuration field to define how WLAN and WIPS are supported by the

access point’s radio(s). Remember, the options available depend on the single, dual or three

radio model deployed. Apply your settings when finished with the updates.

TABLE 1 Radio Configuration

Radio Button Single Radio SKU Dual Radio SKU Three Radio SKU

2.4 GHz WLAN,

5.0 GHz WLAN

& Sensor

Not Available Not Available Radio 1 WLAN,

Radio 2 WLAN,

Radio 3 WIPS

2.4 GHz WLAN,

& Sensor

Not Available Radio1 WLAN,

Radio 2 WIPS

Radio 1 WLAN,

Radio 2 WIPS,

Radio 3 WIPS