Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 585
53-1001945-01
SOLE Config Commands
22
locate
SOLE Config Commands
Use this command to invoke location commands.
Syntax
locate [aeroscout|ekahau |mobile-unit]
locate aeroscout [enable|interval <5-3600>]
locate ekahau [enable|interval <5-3600>]
locate mobile-unit [<AA-BB-CC-DD-EE-FF(enable)|enable|interval <5-3600>]
Parameters
Example
RFS7000(config-rtls-sole)#locate aeroscout enable
RFS7000(config-rtls-sole)#
RFS7000(config-rtls-sole)#locate ekahau interval 5
RFS7000(config-rtls-sole)#
aeroscout [enable|interval
<5-3600>]
Locates aeroscout tags.
ekahau [enable|interval
<5-3600>]
Locates ekahau tags.
mobile-unit[<AA-BB-CC-DD-
EE-FF|enable|interval
<5-3600>]
Locates specified mobile-units.
• AA-BB-CC-DD-EE-FF (enable)– MAC address of the mobile-unit.
enable
Starts locating
|interval <5-3600>
Configures location interval.
• <5-3600> – Interval in seconds.