Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide

572 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
RTLS Config Commands
21
Parameters
Usage Guidelines
Use [no] service [options] to rollback any service related configurations.
Example
RFSwitch(config-rtls)#service filter 1 length 1
RFSwitch(config-rtls)#
ap <AA-BB-CC-DD-EE-FF>
Access port coordinate configuration.
• <AA-BB-CC-DD-EE-FF> – Acces port MAC address.
service filter <1-100>
[action|length <1-128>|mask|
memory-bank|name|offset<0-32>]
Configures RFID tag filter
• action [allow|deny] – Configures action for tag filter. By default its
configured to allow
• length <1-128> – Configures number of bits to compare against tag
mask
• mask <nameWORD> – Configures tag mask for filter
• memory-bank [epc|tid|uid] – Configures tag memory bank for the filter
• epc – EPC memory bank
• tid – TID memory bank
• uid – UID memory bank
• name <nameWORD> – Configures tag filter name
• offset <0-32> – Configures first location of memory bank against which
the tag mask is compared
rtls (mode)
Shows rumnning information.
• mode {auto|presence|trilateration}– Sets rlts mode.
• auto – Sets auto mode.
• presence – Sets presence-only mode.
• trilateration – Sets trilateration-only mode.
show cli
Show running system information
• cli – Show CLI tree of current mode