Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 567
53-1001945-01
RTLS Config Commands
21
ekahau
RTLS Config Commands
Syntax
ekahau [enable|engine ip <IPA.B.C.D> port<Port>|multicast-listen-addr<MAC>]
Parameters
Use
[no] enable and [no] engine <ip><port> to undo the ekahau RTLS engine configuration
and disable it.
Example
RFS7000(config-rtls)#ekahau enable
RFS7000(config-rtls)#
RFS7000(config-rtls)#ekahau engine ip 10.1.1.1 port 1001
RFS7000(config-rtls)#
RFS7000(config-rtls)#ekahau multicast-listen-addr 01-18-8E-00-00-00
RFS7000(config-rtls)#
enable
Enables and configures external ekahau RTLS engine
engine ip <IPA.B>C.D> port <Port>
Configures the IP address and port number of the external ekahau RTLS
engine
• ip <A.B>C.D> – Configures external location engine IP address
• port <1000-9000> – Configure external location engine port
multicast-listen-addr
<MACAA-BB-CC-DD-EE-FF>
Configures multicast MAC address to which ekahau tags packets are destined
• <MACAA-BB-CC-DD-EE-FF> – Multicast MAC address