Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
560 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
RTLS Config Commands
21
aeroscout
RTLS Config Commands
Use this command to configure support for Aeroscout RTLS engine.
Syntax
aeroscout [enable|multicast-listen-addr<MAC-Address>]
Parameters
Usage Guidelines
Use
[no] aeroscout (enable) to disable support for Aeroscout RTLS engine. This does not
affect on-board locationing.
Example
RFSwitch(config-rtls)#aeroscout enable
RFSwitch(config-rtls)#
enable
Enables and configures external Aeroscout RTLS engine
multicast-listen-addr
<AA-BB-CC-DD-EE-FF>
Configures multicast MAC address to which Aeroscout tags packets are
destined
• <MAC-AddressAA-BB-CC-DD-EE-FF> – Multicast MAC address.
AeroScout’s default multicast MAC address is ‘01:0C:CC:00:00:00’