Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance

546 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
• tkip-mic-counter-measures-caused-by-station [enable
{authorized|ignored|unauthorized}|filter-out <1-86400>] – TKIP MIC Counter
measures Caused by Station.
• transmitting-device-using-invalid-mac [enable
{authorized|ignored|unauthorized}|filter-out <1-86400>] – Transmitting
Device Using Invalid MAC.
• unauthorized-ap-using-authorized-ssid [enable
{authorized|ignored|unauthorized}|filter-out <1-86400>] – Unauthorized AP
Using Authorized SSID.
• unencrypted-station-transmission-detected [enable
{authorized|ignored|unauthorized}|filter-out <1-86400>] – Unencrypted
Station Transmission Detected.
• enable {authorized|ignored|unauthorized} – Enables monitoring, filtering
and triggering alarms.
• authorized – Trigger against Authorized devices.
• ignored – Trigger against ignored devices.
• unauthorized – Trigger against unauthorized devices.
• filter-out <1-86400> – Filters age-out duration for the mobile unit.The
duration ranges from 1- 86400 seconds.
• threshold <mu|radio> – Configure sthe threshold of events allowed in the
detection window.
• mu <0-65535> – Uses the threshold for monitoring on a per-mobile-unit
basis.
• radio <0-65535> – Uses the threshold for monitoring on a per-radio basis.
• <0-65535> – The threshold of events allowed in the detection window.
reset-to-default
Resets to default settings.










