Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 529
53-1001945-01
Wireless Configuration Commands
20
Example
RFS7000(config-wireless)#radio 250 bss auto 3-5
RFS7000(config-wireless)#
RFS7000(config-wireless)#radio 1 channel-power indoor 1 16
Regulatory parameter values depend on country of operation and radio type.
Refer to documentation for more regulatory information
RFS7000(config-wireless)#
tag_type
[aeroscout|cricket|newbury]
(listen-addr)
<MAC address>
Configures wi-fi tag type.
• aeroscout – Aeroscout Active tag.
• cricket – Cricket (Brocade) Active tag.
• newbury – Newbury active tag.
• listen-addr – Configure multicast listening address for wi-fi active tags.
• AA-BB-CC-DD-EE-FF – Multicast MAC address.
NOTE: For Aeroscout tag, the address is configurable. Unless the address is
configured on the radio, the tag packet will not be forwarded to the switch
from the AP.
timeout <40-180>
Specifies timeout value in seconds.
tunnel (tx-rate-class)
Parameters related to tunnel to AP.
tx-rate-class <1-4> – Packet rate class.
RADIO
A list (3,7) or range (3-7) of radio indices.
add <1-1000>1-4096> (MAC
Address)
[11an (aap7131)]
[11bgn (aap7131)]
Adds a new radio.
• <1-1000> – Index where this radio is added.
• MAC – MAC address in AA-BB-CC-DD-EE-FF format.
• 11a – 802.11a type radio.
• 11anb – 802.11anb type radio.
• 11bg – 802.11bg type radio.
• 11bgn – 802.11bgn type radio.
• aap7131 – access-port type Adaptive AP ap7131.
all-11a
All 11a radios currently in configuration.
all-11an
All 11an radios currently in configuration.
all-11b
All 11b radios currently in configuration.
all-11bg
All 11bg radios currently in configuration.
all-11bgn
All 11bgn radios currently in configuration.
configure-8021X
Configures the 802.1X username and password on adopted access ports.
default-11a
Default 11a configuration template.
default-11an
Default 11an configuration template.
default-11b
Default 11b configuration template.
default-11bg
Default 11bg configuration template.
default-11bgn
Default 11bgn configuration template.
dns-name WORD (MAC Address)
Configures the DNS name used in the L3 Discovery of adopted access ports.
• AA-BB-CC-DD-EE-FF – Changes the DNS name on only the access port with
the specified MAC address. If not specified, the DNS name update is sent to
all adopted access ports.