Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide

524 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
radio
Wireless Configuration Commands
Use this command to configure radio related settings.
Syntax
radio ( <1-4096>| RADIO|add|all-11a|all-11an|all-11b|all-11bg|all-11bgn|
configure-8021X|default-11a|default-11an|default-11b|default-11bg|
default-11bgn|dns-name)
radio <1-4096> (admission-control|adoption-policy|adoption-pref-id|ampdu|
antenna-mode|base-bridge|beacon-interval|bridge-fwd-delay|bridge-hello|bridge-max
-ageout|bridge-msg-age|bridge-priority|
bss|channel-power|client-bridge|
copy-config-from|description|detector|dot11k|dtim-period|
enforce-spec-mgmt|enhanced-beacon-table|enhanced-probe-table|group-id|location-me
ssage|mac|max-mobile-units|mesh-associations|moto-simple-voice
mu-power <0-20>|neighbor-smart-scannas-id|nas-port-id||
on-channel-scan|radio-number|reset|reset-ap|rts-thresholdrf-mode |rss (enable)|
rts-threshold|run-acs|self-heal-offset|short-gi|short-preamble|speed|tag-type|tim
eout|tunnel)
radio <1-4096> adoption-policy [allow|deny]
radio <1-4096> bss(< 1-4 >|add-wlans|auto>)WLAN
radio <1-4096> channel-power(indoor|outdoor)( <1-200> |acs|random) <4-20>
radio <1-4096> copy-config-from( <1-1000> |default-11a|default-11b|default-11bg)
radio <1-4096> dtim-period <1-50> bss <1-4>
radio <1- 4096 > location-led [start-flashing|stop-flashing]
radio <1- 4096 > neighbor-smart-scan [<1-4096>|<radio range>]
radio <1- 4096 > tag_type [aeroscout|cricket|newbury] (listen-addr) <MAC address>
radio add <1-4096> (MAC Address)[11an (aap7131)|11bgn (aap-7131)]