Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 485
53-1001945-01
Wireless Configuration Commands
20
aap
Wireless Configuration Commands
Use this command to invoke AAP related commands.
Syntax
aap [config-apply|include-config]
aap [config-apply (def-delay <30-10000> |mesh-delay <3-10000>)]
aap [include-config (snmp|syslog)]
Parameters
Example
RFS7000(config-wireless)#aap config-apply def-delay 30
RFS7000(config-wireless)#
RFS7000(config-wireless)#aap include-config snmp
RFS7000(config-wireless)#
config-apply
[def-delay|mesh-delay]
Configuration apply settings.
• def-delay <30-10000> – Default time to delay before applying configuration.
• <30-10000> – Time to delay in seconds.
• mesh-delay <3-10000> – Time to delay before applying configuration to Mesh
APs.
• <3-10000> – Time to delay in minutes.
Include-config
[snmp|sysylog]
Include configuration.
• snmp – SNMP configuration settings.
• syslog – Syslog configuration settings.