Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 479
53-1001945-01
RADIUS Configuration Commands
19
server
RADIUS Configuration Commands
Use this command to configure the server certificate parameters used by the RADIUS server. The
server certificate is a part of a trustpoint created crypto on page 183.
Syntax
server trust-point
Parameters
Usage Guidelines
Create a trustpoint using
(crypto-pki-trustpoint). Server certificate is created under the
trustpoint using crypto-pki commands. Refer to crypto on page 183 for more details.
Example
RFS7000(config-radsrv)#server trust-point TestTP
RFS7000(config-radsrv)#
trust-point (WORD)
Trustpoint configuration.
• WORD – Existing trustpoint name.