Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 451
53-1001945-01
RADIUS Configuration Commands
19
ca
RADIUS Configuration Commands
Use this command to configure CA (Certificate Authority) parameters.
Syntax
ca trust-point(WORD)
Parameters
Usage Guidelines
Configure the trustpoint used by the local RADIUS server. Create the
trustpoint before it is used
by the
crypto pki trustpoint command.
The default trustpoint in use is –
default-trustpoint.
Example
In the example below, the trustpoint (
tp1) already has a certificate associated with it.
RFS7000(config)#radius-server local
RFS7000(config-radsrv)#ca trust-point tp1
RFS7000(config-radsrv)#
trust-point (WORD)
Trustpoint configuration.
• WORD – Existing trustpoint name.