Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide

444 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
DHCP Server Class Config Commands
18
option
DHCP Server Class Config Commands
Use this command to specify a value for DHCP user class options. This command is used in Step 2
in the usage guidelines provided below.
Syntax
option (user-class)(user class name)
Parameters
Usage Guidelines
Follow the steps below to create a DHCP User Class:
1. Create a DHCP class named
RFS7000DHCPclass. The Brocade Mobility RFS7000-GR Controller
supports a maximum of 8 DHCP classes.
RFS7000(config)#ip dhcp class RFS7000DHCPclass
RFS7000(config-dhcpclass)#
2. Create a USER class named MC800. The privilege mode changes to (config-dhcpclass). The
Brocade Mobility RFS7000-GR Controller supports a maximum of 8 Users classes per DHCP
class.
RFS7000(config-dhcpclass)#option user-class MC800
RFS7000(config-dhcpclass)#
3. Create a Pool named WID, using (config)# mode.
RFS7000(config)#ip dhcp pool WID
RFS7000(config-dhcp)#
4. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The Brocade
Mobility RFS7000-GR Controller supports association of only 8 CDHCP classes with a pool.
RFS7000(config-dhcp)#class RFS7000DHCPclass
RFS7000(config-dhcp-class)#
5. The switch moves to a new mode (config-dhcp-class). Use this mode to add a address range
used for the DHCP class associated with the pool.
RFS7000(config-dhcp-class)#address range 11.22.33.44
Example
RFS7000(config-dhcpclass)#option user-class MC800
RFS7000(config-dhcpclass)#
user-class
(user classname)
Use this to create a DHCP Server user-class options.