Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 425
53-1001945-01
DHCP Config Commands
17
netbios-node-type
DHCP Config Commands
Use this command to configure the netbios-node type.
Syntax
netbios-node-type [b-node|h-node|m-node|p-node]
Parameters
Example
RFS7000(config-dhcp)#netbios-node-type p-node
RFS7000(config-dhcp)#
netbios-node-type
[b-node | h-node |
m-node | p-node]
NetBIOS (WINS) name servers.
• b-node – Broadcast node.
• h-node – Hybrid node.
• m-node – Mixed node.
• p-node – Peer-to-peer node.