Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
360 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Extended ACL Config Commands
14
mark
Extended ACL Config Commands
Use this command to mark specific packets.
Syntax
mark {dot1p8021p <0-7> | dscp <0-63 >|tos <0-255>}} {ip} {source/source-mask
A.B.C.D/M| host sourcehost | any} {destination/destination-mask | host
destinationhost | any} [log] [rule-precedence access-list-entry precedence]
mark {dot1p <0-7> |8021p <0-7> | dscp <0-63 >| tos <0-255>}} {icmp}
{source/source-mask A.B.C.D/M| host sourcehost | any} {destination/
destination-maskA.B.C.D/M | host destinationhost | any} [icmp-type | [icmp-type
icmp-code]] [log] [rule-precedence access-list-entry precedence]
mark {8021p <0-7> | dscp <0-63 >| tos <0-255>}} {proto} {A.B.C.D/M| host | any}
{A.B.C.D/M | host | any} [icmp-type | [icmp-type icmp-code]] [log]
[rule-precedence access-list-entry precedence]
mark {dot1p <0-7> |8021p <0-7> | dscp <0-63 >| tos <0-255>}} {tcp|udp}
{source/source-mask A.B.C.D/M| host sourcehost | any} [operator source-port]
{destination/destination-mask | host destinationhost | any} [operator
destination-port] [log] [rule-precedence access-list-entry precedence]