Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 353
53-1001945-01
Extended ACL Config Commands
14
deny
Extended ACL Config Commands
Use this command to specify packets to reject.
Syntax
deny(icmp|ip|proto|tcp|udp)
deny {ip} {source/source-mask A.B.C.D/M| host sourcehost | any}
{destination/destination-mask | host destinationhost | any} [log]
[rule-precedence access-list-entry precedence]
deny {icmp} {source/source-mask A.B.C.D/M| host sourcehost | any} {destination/
destination-maskA.B.C.D/M | host destinationhost | any} [icmp-type | [icmp-type
icmp-code]] [log] [rule-precedence access-list-entry precedence]
deny {tcp|udp} {source/source-mask A.B.C.D/M| host sourcehost | any} [operator
source-port] {destination/destination-mask | host destinationhost | any}
[operator destination-port] [log] [rule-precedence access-list-entry precedence]