Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR CLI Reference Guide 351
53-1001945-01
Chapter
14Extended ACL Instance
In this chapter
•Extended ACL Config Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
Use the(config-ext-nacl) instance to configure ip access-list extended ACLs.
Extended ACL Config Commands
The following table summarizes the config-ext-nacl commands.
TABLE 10 Extended ACL config commands
Command Description Ref.
clrscr Clears the display screen. page 352
deny Specifies packets to reject. page 353
end Ends the current mode and changes to the EXEC mode. page 357
exit Ends the current mode and moves back to the previous mode. page 358
help Displays the interactive help system. page 359
mark Specifies packets to mark. page 360
no Negates a command or set default values. page 364
permit Specifies packets to forward. page 365
service Service commands. page 369
show Shows running system information. page 370