Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR Controller CLI Reference Guide 253
53-1001945-01
Crypto Group Config Commands
7
dns
Crypto Group Config Commands
Use this command to specify the DNS server address(es) to assign to a client.
Syntax
dns <IP Address>
Parameters
Example
RFS7000(config-crypto-group)#dns-server 172.1.17.1 172.1.17.3
RFS7000(config-crypto-group)#
<IP Address>
The first DNS server address to assign.