Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR Controller CLI Reference Guide 251
53-1001945-01
Chapter
7Crypto-group Instance
In this chapter
•Crypto Group Config Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Use
crypto isakmp client configuration group default command to initiates the
config-crypto-group instance.
Crypto Group Config Commands
The following table summarizes the config-crypto-group commands within the Brocade Mobility
RFS7000-GR Controller command line interface.
TABLE 4 Crypto Group config commands
Command Description Ref.
clrscr Clears the display screen. page 252
dns Configures Domain Name Server (DNS). page 253
end Ends the current mode and moves to EXEC mode. page 254
exit Ends the current mode and moves to previous mode. page 255
help Description of the interactive help system. page 256
service Displays service commands. page 257
show Shows running system information. page 258
wins Configures Windows Name Server (WINS). page 260