Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide

226 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
management Display L3 Managment Interface name
mobility Display Mobility parameters
ntp Network time protocol
password-encryption password encryption
port-channel Portchannel commands
privilege Show current privilege level
radius RADIUS configuration commands
redundancy-group Display redundancy group parameters
redundancy-history Display state transition history of the switch.
redundancy-members Display redundancy group members in detail
running-config Current Operating configuration
securitymgr Securitymgr parameters
sessions Display current active open connections
spanning-tree Display spanning tree information
startup-config Contents of startup configuration
static-channel-group static channel group membership
terminal Display terminal configuration parameters
timezone Display timezone
upgrade-status Display last image upgrade status
users Display information about currently logged in users
version Display software & hardware version
wireless Wireless configuration commands
wlan-acl wlan based acl
RFS7000(config)#show
RFS7000(config)#show running-config
!
! configuration of RFS7000 version 4.1.0.0-040GR
!
version 1.0
!
!
aaa authentication login default local none
service prompt crash-info
!
username admin password 1 8e67bb26b358e2ed20fe552ed6fb832f397a507d
username admin privilege superuser
username operator password 1 fe96dd39756ac41b74283a9292652d366d73931f
!!
spanning-tree mst cisco-interoperability enable
spanning-tree mst config
name My Name..............................................................
...........................................................................
...........................................................................
...........................................................................
...........................................................................
wireless
!
wlan 1 enable
wlan 1 ssid ajit-open
aap local-bridging enable
aap independent-vlan vlan 1
aap config-apply def-delay 100
aap config-apply mesh-delay 100
radio add 1 00-A0-F8-BF-8A-4B 11bg ap7131
radio 1 rss enable
radio add 2 00-A0-F8-BF-8A-4B 11a ap7131
radio 2 rss enable