Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
202 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
mac
Global Configuration Commands
Use this command to configure MAC access-lists.
Syntax
mac(access-list(extended(WORD)))
Parameters
Usage Guidelines
To delete a Standard/Extended or MAC ACL, use
no access-list <access-list name> under the
Global Config mode.
Example
RFS7000(config)#mac access-list extended Test1
RFS7000(config-ext-macl)#
NOTE
By using the mac access-list parameter, the following context is supplied:
- ext-macl — Extended MAC ACL. For additional information, see
Extended MAC ACL Instance on page 385
access-list
(extended <name>)
Enter a name for MAC extended ACL.