Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
188 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
errdisable
Global Configuration Commands
Use this command to enable the timeout mechanism for the port.
Syntax
errdisable (recovery)[cause (bpduguard)|interval <10-1000000>]
Parameters
Usage Guidelines
Use a
[no] command with the errdisable parameter to disable the bridge timeout mechanism for
the port.
Example
RFS7000(config)#errdisable recovery interval 100
RFS7000(config)#
RFS7000(config)#errdisable recovery cause bpduguard
RFS7000(config)#
RFS7000(config)#no errdisable recovery cause bpduguard
RFS7000(config)#
recovery
Enables the timeout mechanism for the port to be enabled back.
cause (bpduguard)
Reason for errdisable.
• bpduguard – Recover from errdisable due to bpduguard.
interval <10-1000000>
Interval after which port shall be enabled.
• <10-1000000> – Errdisable-timeout interval in seconds.