Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
Brocade Mobility RFS7000-GR Controller CLI Reference Guide 179
53-1001945-01
Global Configuration Commands
5
boot
Global Configuration Commands
This command reboots the switch with an image present in the mentioned partition (either the
primary or secondary partition).
Syntax
boot(system [primary|secondary])
Parameters
Example
RFS7000(config)#boot system primary
Wireless switch will be rebooted, do you want to continue? (y/n):y
Do you want to save the configuration? (y/n):y
The system is going down NOW !!
% Connection is closed by administrator!
Please stand by while rebooting the system.
system
Specifies the boot image used after reboot.
• primary – Specifies the primary image.
• secondary – Specifies the secondary image.