Reference Guide (Supporting software release 4.1.0.0-040GR and later) User guide
Table Of Contents
- Table of Contents
- About This Document
- Introduction
- Common Commands
- User Exec Commands
- Privileged Exec Commands
- Global Configuration Commands
- Crypto-isakmp Instance
- Crypto-group Instance
- Crypto-peer Instance
- Crypto-ipsec Instance
- Crypto-map Instance
- Crypto-trustpoint Instance
- Interface Instance
- Spanning tree-mst Instance
- Extended ACL Instance
- Standard ACL Instance
- Extended MAC ACL Instance
- DHCP Server Instance
- DHCP Class Instance
- RADIUS Server Instance
- Wireless Instance
- RTLS Instance
- SOLE Instance
142 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Priv Exec Command
4
erase
Priv Exec Command
Use this command to erase a target filesystem.
Syntax
erase [flash:|nvram:|startup-config:]
Parameters
Example
RFS7000#erase ?
flash: Erase everything in flash:
nvram: Erase everything in nvram:
startup-config Reset configuration to factory default
RFS7000#erase
flash:
Erases contents of flash.
nvram:
Erases contents of nvram.
startup-config
Resets the switch configuration to factory default settings.