Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 981
53-1003098-01
14
Enables logging on flow creating traffic
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
acl-logging
Parameters
None
Example
rfs4000-229D58(config-fw-policy-test)#acl-logging
rfs4000-229D58(config-fw-policy-test)#
rfs4000-229D58(config-fw-policy-test)#no acl-logging
rfs4000-229D58(config-fw-policy-test)#
rfs4000-229D58(config-fw-policy-test)#show context
firewall-policy test
no ip dos tcp-sequence-past-window
no acl-logging
rfs4000-229D58(config-fw-policy-test)#
Related Commands:
alg
firewall-policy
Enables preconfigured algorithms supporting a particular protocol
The Firewall policy allows traffic filtering at the application layer using the Application Layer
Gateway (ALG) feature
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no Disables logging on flow creating traffic