Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

954 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
bootfile test.txt
default-router 192.168.13.8 192.168.13.9
dns-server 192.168.13.19
netbios-name-server 192.168.13.25
next-server 192.168.13.26
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no bootfile
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no network
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no default-router
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no next-server
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no domain-name
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no ddns domainname
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#no lease
The following example shows the DHCP pool settings after the ‘no’ commands are
executed:
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
address 192.168.13.4 class dhcpclass1
ddns server 192.168.13.9
ddns multiple-user-class
excluded-address range 192.168.13.25 192.168.13.28
netbios-node-type b-node
dns-server 192.168.13.19
netbios-name-server 192.168.13.25
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
address Configures the DHCP server’s IP address pool
bootfile Configures the BOOTP boot file path
ddns Configures DDNS for use with this DHCP pool
default-router Configures default routers for this DHCP pool
dns-server Configures default DNS servers for this DHCP pool
domain-name Configures the DDNS domain name for this DHCP pool
excluded-address Configures IP addresses assigned as static addresses
lease Configures the DHCP lease settings
netbios-name-server Configures the NetBIOS name server
netbios-node-type Configures the NetBIOS node type
network Configures the DHCP server’s network settings
next-server Configures the next server in the BOOTP boot process
option Configures the DHCP option
respond-via-unicast Configures how a DHCP request and ACK are sent
static-binding Configure static binding information
static-route Configures static routes installed on DHCP clients
update Controls DDNS service usage