Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 933
53-1003098-01
13
The following table summarizes DHCP user class configuration commands.
multiple-user-class
dhcp-class-mode commands
Enables or disables multiple user class option for this DHCP user class policy. Enabling this option
allows this user class to transmit multiple option values to other DHCP servers also supporting
multiple user class options.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
multiple-user-class
Parameters
None
Example
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#multiple-user-class
rfs7000-37FABE(config-dhcp-policy-test-class-dhcpclass1)#show context
dhcp-class dhcpclass1
multiple-user-class
rfs7000-37FABE(config-dhcp-policy-test-class-dhcpclass1)#
Command Description Reference
multiple-user-class Enables or disables multiple user class option for this DHCP user class policy page 933
no Negates a command or sets its default page 934
option Configures DHCP user class options for this DHCP user class policy page 935
clrscr Clears the display screen page 385
commit Commits (saves) changes made in the current session page 386
end Ends and exits the current mode and moves to the PRIV EXEC mode page 234
exit Ends the current mode and moves to the previous mode page 387
help Displays the interactive help system page 387
revert Reverts changes to their last saved configuration page 394
service Invokes service commands to troubleshoot or debug
(config-if) instance
configurations
page 394
show Displays running system information page 429
write Writes information to memory or terminal page 425