Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

844 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
8
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
mac-address-format [middle-hyphen|no-delim|pair-colon|pair-hyphen|quad-dot]
mac-address-format [middle-hyphen|no-delim|pair-colon|pair-hyphen|quad-dot]
case [lower|upper] attributes [all|username-password]
Parameters]
mac-address-format [middle-hyphen|no-delim|pair-colon|pair-hyphen|quad-dot]
case [lower|upper] attributes [all|username-password]
Example
rfs7000-37FABE(config-aaa-policy-test)#mac-address-format quad-dot case upper
attributes username-password
rfs7000-37FABE(config-aaa-policy-test)#show context
aaa-policy test
authentication server 5 host 172.16.10.10 secret 0 example port 1009
authentication server 5 timeout 10
accounting server 2 host 172.16.10.10 secret 0 example port 1
accounting server 2 timeout 2 attempts 2
mac-address-format quad-dot case upper attributes username-password
authentication protocol chap
--More--
rfs7000-37FABE(config-aaa-policy-test)#
Related Commands:
no
aaa-policy
Negates a AAA policy command or sets its default
Supported in the following platforms:
middle-hyphen Configures the MAC address format as AABBCC-DDEEFF
no-delim Configures the MAC address format as AABBCCDDEEFF (without delimitors)
pair-colon Configures the MAC address format as AA:BB:CC:DD:EE:FF
pair-hyphen Configures the MAC address display format as AA-BB-CC-DD-EE-FF (default setting)
quad-dot Configures the MAC address display format as AABB.CCDD.EEFF
case [lower|upper] Indicates the case the MAC address is formatted
• lower – Indicates MAC address is in lower case. For example, aa:bb:cc:dd:ee:ff
• upper – Indicates MAC address is in upper case. For example, AA:BB:CC:DD:EE:FF (default setting)
attributes
[all|
username-password]
Configures RADIUS attributes to which this MAC format is applicable
• all – Applies to all attributes with MAC addresses such as username, password,
calling-station-id, and called-station-id
• username-password – Applies only to the username and password fields (default setting)
no Resets the MAC address format to default (pair-hyphen)