Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

810 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Related Commands:
channel-list
Device Config Commands
Configures the channel list advertised to wireless clients
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
channel-list [2.4GHz|5GHz|dynamic]
channel-list [2.4GHz <CHANNEL-LIST>|5GHz <CHANNEL-LIST>|dynamic]
Parameters
channel-list [2.4GHz <CHANNEL-LIST>|5GHz <CHANNEL-LIST>|dynamic]
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#channel-list 2.4GHz 1,2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname br7131-4AA708
area RMZEcospace
channel-list 2.4GHz 1,2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
contact
Device Config Commands
no Disables or reverts settings to their default
2.4GHz
<CHANNEL-LIST>
Configures the channel list advertised by radios operating in 2.4 GHz
• <CHANNEL-LIST> – Specify a list of channels separated by commas or hyphens.
5GHz <CHANNEL-LIST> Configures the channel list advertised by radios operating in 5.0 GHz
• <CHANNEL-LIST> – Specify a list of channels separated by commas or hyphens.
dynamic Enables dynamic (neighboring access point based) update of configured channel list
no Resets the channel list configuration