Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 809
53-1003098-01
7
Syntax:
adoption-site <SITE-NAME>
Parameters
adoption-site <SITE-NAME>
Example
rfs4000-229D58(config-device-00-23-68-22-9D-58)#adoption-site MotoEcoSpace3B
rfs4000-229D58(config-device-00-23-68-22-9D-58)#
Related Commands:
area
Device Config Commands
Sets the area where the system is deployed
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
area <AREA-NAME>
Parameters
area <AREA-NAME>
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#area RMZEcoSpace
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname br7131-4AA708
area RMZEcospace
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
adoption-site
<SITE-NAME>
Sets the device’s adoption site name
no Disables or reverts settings to their default
area <AREA-NAME> Sets the area where the system is deployed
<AREA-NAME> – Specify the area name.