Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 607
53-1003098-01
7
Parameters
no [authentication|ip|localid|remoteid|use]
Example
The following example shows the Crypto IKEV1 peer1 settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-peer-peer1)#show context
crypto ikev1 peer peer1
ip address 172.16.10.12
remoteid dn SanJose
localid email [e-mail]
use ikev1-policy test-ikev1policy
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-peer-peer1)#
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-peer-peer1)#no localid
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-peer-peer1)#no remoteid
The following example shows the Crypto IKEV1 peer1 settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-peer-peer1)#show context
crypto ikev1 peer peer1
ip address 172.16.10.12
use ikev1-policy test-ikev1policy
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-peer-peer1)#
The following example shows the Crypto IKEV2 peer1 settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-profile-default-rfs7000-ikev2-peer-peer1)#show context
crypto ikev2 peer peer1
remoteid address 157.235.209.63
use ikev2-policy test
rfs7000-37FABE(config-profile-default-rfs7000-ikev2-peer-peer1)#
The following example shows the Crypto IKEV2 peer1 settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-profile-default-rfs7000-ikev2-peer-peer1)#no use
ikev2-policy
rfs7000-37FABE(config-profile-default-rfs7000-ikev2-peer-peer1)#show context
crypto ikev2 peer peer1
remoteid address 157.235.209.63
rfs7000-37FABE(config-profile-default-rfs7000-ikev2-peer-peer1)#
crypto-map-config-commands
crypto
no authentication Removes a IKEv1/IKEv2 peer’s authentication credentials
no ip Removes a IKEv1/IKEv2 peer’s IP address / FQDN
no localid Removes a IKEv1/IKEv2 peer’s local identity details
no remoteid Removes a IKEv1/IKEv2 peer’s remote identity details
no use Removes the IKEv1/IKEv2 policy associated with IKEv1/IKEv2 peer respectively