Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 513
53-1003098-01
6
show terminal
Parameters
None
Example
rfs7000-37FABE(config)#show terminal
Terminal Type: xterm
Length: 24 Width: 200
rfs7000-37FABE(config)#
timezone
show commands
Displays a device’s timezone
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show timezone
Parameters
None
Example
rfs7000-37FABE(config)#show timezone
Timezone is America/Los_Angeles
rfs7000-37FABE(config)#
upgrade-status
show commands
Displays the last image upgrade status
NOTE
This command is not available in the USER EXEC Mode.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000