Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 497
53-1003098-01
6
No ROLE statistics found.
rfs7000-37FABE(config)#
route-maps
show commands
Displays route map statistics for defined device routes
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show route-maps {on <DEVICE-NAME>}
Parameters
show route-maps {on <DEVICE-NAME>}
Example
rfs7000-37FABE(config)#show route-maps on rfs7000-37FABE
rfs7000-37FABE(config)#
rtls
show commands
Displays Real Time Location Service (RTLS) statistics for access points contributing locationing
information
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show rtls [aeroscout|ekahau] {<MAC/HOSTNAME>} {(on <DEVICE-OR-DOMAIN-NAME>)}
route-maps Displays configured route map statistics for all defined routes
NOTE: For more information on route maps, see route-map on page 25-1243.
on <DEVICE-NAME> Optional. Displays route map statistics on a specified device
• <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.