Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

486 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
show lldp report {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}
Example
rfs7000-37FABE(config)#show lldp neighbors
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show lldp neighbors on rfs7000-37FABE
rfs7000-37FABE(config)#
logging
show commands
Displays the network’s activity log
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show logging {on <DEVICE-NAME>}
Parameters
show logging {on <DEVICE-NAME>}
Example
rfs4000-229D58(config)#show logging on rfs4000-229D58
Logging module: enabled
Aggregation time: disabled
Console logging: level warnings
Monitor logging: disabled
Buffered logging: level warnings
Syslog logging: level warnings
Facility: local7
Log Buffer (359 bytes):
lldp Displays an LLDP neighbors table or aggregated LLDP neighbors table
report detail Displays an aggregated LLDP neighbors table
• detail – Optional. Displays detailed aggregated LLDP neighbors table
on <DEVICE-NAME> The following keyword is recursive and common to the ‘report detail’ parameter:
• on <DEVICE-NAME> – Displays an aggregated LLDP neighbors table on a specified device
• <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
logging
{on <DEVICE-NAME>}
Displays logging information on a specified device
• <DEVICE-NAME> – Optional. Specify the name of the AP, wireless controller, or service platform.