Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

478 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
-----------------------------------------------------------------------------
---
rfs4000-229D58#
ip-access-list
show commands
Displays IP access list statistics
NOTE
This command is not available in the USER EXEC Mode.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show ip-access-list stats {<IP-ACCESS-LIST-NAME>|detail|on}
show ip-access-list stats {<IP-ACCESS-LIST-NAME>|detail <IP-ACCESS-LIST-NAME>}
{(on <DEVICE-NAME>)}
Parameters
show ip-access-list stats {<IP-ACCESS-LIST-NAME>|detail <IP-ACCESS-LIST-NAME>}
{(on <DEVICE-NAME>)}
Example
rfs7000-37FABE(config)#show ip-access-list stats
IP Access-list: # Restrict Management ACL #
permit tcp any any eq ftp rule-precedence 1 Hitcount: 0
permit tcp any any eq www rule-precedence 2 Hitcount: 4
permit tcp any any eq ssh rule-precedence 3 Hitcount: 448
permit tcp any any eq https rule-precedence 4 Hitcount: 0
permit udp any any eq snmp rule-precedence 5 Hitcount: 0
permit tcp any any eq telnet rule-precedence 6 Hitcount: 4
rfs7000-37FABE(config)#
The following example displays the ‘auto-tunnel-acl’ IP ACL configuration:
rfs4000-229D58(config)#ip access-list auto-tunnel-acl
ip-access-list stats Displays IP access list statistics
<IP-ACCESS-LIST-NAME> Optional. Displays statistics for a specified IP access list. Specify the IP access list name.
detail
<IP-ACCESS-LIST-NAME>
Optional. Displays detailed statistics for a specified IP access list. Specify the IP access list name.
on <DEVICE-NAME> The following keyword is recursive and common to the ‘IP-ACCESS-LIST-NAME’ and ‘detail’ parameters:
• on <DEVICE-NAME> – Optional. Displays all or a specified IP access list statistics on a specified device.
• <DEVICE-NAME> – Optional. Specify the name of the AP, wireless controller, or service platform.