Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

416 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
5
service show last-passwd
service signal [abort <PROCESS-NAME>|kill <PROCESS-NAME>]
service start-shell
service trace <PROCESS-NAME> {summary}
Syntax: (Privilege Exec Mode: Brocade Mobility RFS9510)
service
The following service commands are specific to the Brocade Mobility RFS9510
series service platforms:
direction
[any|inbound|outbound]
Optional. Changes the packet direction with respect to a device. The direction can be set as any, inbound, or
outbound.
filter <LINE> Optional. Filters packets based on the option selected (must be used as a last option)
• <LINE> – Define a packet capture filter or select any one of the available options.
hex Optional. Provides binary output of the captured packets
rate <1-100> Optional. Specifies the packet capture rate
• <1-100> – Specify a value from 1 - 100 seconds.
snap <1-2048> Optional. Captures the data length
• <1-2048> – Specify a value from 1 - 2048 characters.
tcpdump Optional. Decodes the TCP dump
verbose Optional. Provides verbose output
write Captures packets to a specified file. Provide the file name and location in the following format:
FILE – flash:/path/file
cf:/path/file
usb1:/path/file
usb2:/path/file
nvram:startup-config
URL – tftp://<hostname|IP>[:port]/path/file
ftp://<user>:<passwd>@<hostname|IP>[:port]/path/file
sftp://<user>@<hostname|IP>[:port]>/path/file
tzsp – The TZSP host. Specify the TZSP host’s IP address or hostname.
show Displays running system statistics based on the parameters passed
last-passwd Displays the last password used to enter shell
signal Sends a signal to a process
• tech-support – Copies extensive system information useful for troubleshooting
abort Sends an abort signal to a process, and forces it to dump to core
• <PROCESS-NAME> – Specify the process name.
kill Sends a kill signal to a process, and forces it to terminate without a core
• <PROCESS-NAME> – Specify the process name.
start-shell Provides shell access
trace Traces a process for system calls and signals
<PROCESS-NAME> Specifies the process name
summary Optional. Generates summary report of the specified process