Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual
Brocade Mobility RFS Controller CLI Reference Guide 411
53-1003098-01
5
service wireless qos delete-tspec <MAC> tid <0-7>
service wireless trace pattern <WORD> {on <DEVICE-NAME>}
service wireless wips clear-client-blacklist [all|mac <MAC>]
service wireless wips clear-event-history {on <DEVICE-OR-DOMAIN-NAME}
Syntax: (Privilege Exec Mode)
NOTE
The “service” command of the Priv Exec Mode is the same as the service command in the User Exec
Mode. There a few modifications that have been documented in this section. For the syntax and
parameters of the other commands refer to the
(User Exec Mode) syntax and (User Exec Mode) parameters sections of this chapter.
service
service [advanced-wips|block-adopter-config-updates|clear|
cli-tables-skin|cluster|copy|delete|delete-offline-aps|force-send-config|
force-update-vm-stats|load-balancing|locator|mint|pktcap|pm|radio|radius|
request-full-config-from-adopter|set|show|signal|smart-rf|ssm|start-shell|
trace|wireless]
service copy tech-support [<FILE>|<URL>]
service clear crash-info {on <DEVICE-NAME>}
wireless qos
delete-tspec
Sends a delete TSPEC request to a wireless client
<MAC> Specify the MAC address of the wireless client.
tid <0-7> Deletes the Traffic Identifier (TID)
• <0-7> – Select the TID from 0 - 7.
wireless trace Displays the wireless module trace based on parameters passed
pattern <WORD> Configures the pattern to match
• <WORD> – Specify the pattern to match.
on <DEVICE-NAME> Optional. Displays the wireless module trace on a specified device
• <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
wireless wips Enables management of WIPS parameters
clear-client-blacklist
[all|mac <MAC>]
Removes a specified client or all clients from the blacklist
• all – Removes all clients from the blacklist
• mac <MAC> – Removes a specified client form the blacklist
• <MAC> – Specify the wireless client’s MAC address.
wireless wips Enables WIPS management
clear-event-history Clears event history
on
<DEVICE-OR-DOMAIN-NAME
>
Optional. Clears event history on a device or RF Domain
• <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF
Domain.